索尼近期发布了 PS4 7.50 系统更新，称新固件将提升系统稳定性。不过部分玩家在更新主机系统后，反而出现了以下几种问题：主机无法正常开机，小部分机器还会出现反复开机的“死循环”问题；主机开机正常，但出现黑屏状况； 手柄已经开启，但无法发送任何信号；个别玩家反映主机的蓝光光驱发生故障，无法安装数据。此项故障与系统更新的关系还有待查证。 以上问题并非必然出现，因此各位 PS4 玩家不必过于担心。如果你的主机不幸“中招”，也有相应的解决方法。你可以在强制关闭主机后再次按住电源键，从而进入 PS4 主机的安全模式。部分故障主机会在这时自动重启并恢复正常。如果主机没有重启，你也可以通过 USB 设备重新安装系统固件。 重新安装系统的操作步骤请在官网链接查看，请注意主机的地区版本。来源：索尼/VG24
Sony recently released the ps47.50 system update, saying the new firmware will improve system stability. However, after some players update the host system, they have the following problems: the host can not be started normally, and a small part of the machine will have a "dead cycle" problem of repeatedly starting; the host can be started normally, but there is a black screen condition; & nbsp; The handle has been turned on, but no signal can be sent; some players report that the Blu ray drive of the host computer has failed, and data cannot be installed. The relationship between this fault and system update remains to be verified. The above problems are not inevitable, so you PS4 players do not have to worry too much. If your host is unlucky, there are corresponding solutions. You can press and hold the power key again after powering off the host to enter the security mode of PS4 host. Some failed hosts will restart automatically and return to normal. If the host does not restart, you can also reinstall the system firmware through the USB device. Please check the link on the official website for the steps of reinstalling the system. Please pay attention to the regional version of the host. Source: Sony / vg24
